PILOT 150 PR-2150 This product manual contains important information about the safe installation and use of this projector. Please re
TECHNICAL DATA VOLTAGES: 100/120/200/220/230/240V AC, 50Hz or 60Hz To Order. POWER CONSUMPTION: 280W @ 220V LAMP: Type
LIGHT OUTPUT BEAM DIAMETERØ1.01m Ø2.1m Ø5.25mØ4.2mØ3.15m0m 25m20m15m10m5m1200 lux 300 lux 133 lux 75 lux 48 lux6m0m1m1m2m2m3m3m4m4m5m5m6m13º ELEC
COMPONENT ORDER CODES FOR PR-2150 NO NAME PART NO. REMARK 040020035 240V/50Hz 040020037 100V/200V/230V 50/60Hz 1 TRANSFORMER 040020033 100V/120V/220V
PILOT150 manual en.doc 13/14
PEARL RIVER LIGHT & ACOUSTICS INDUSTRIAL LTD. Yingbin Road, Dashi, Panyu, Guangzhou ,
INDEX SECTION PAGE SAFE USAGE OF THE PROJECTOR 3 INSTALLING THE PROJECTOR 4 FITTING THE LAMP
SAFE USAGE OF THE PROJECTOR When unpacking and before disposing of the carton check there is no transportation damage before using the projector.
INSTALLING THE PROJECTOR M8x25BoltBracketFixingHoleM8x25BoltPass safety fixingthrough these holes The projector should be mounted via its bracket
FUSE F6.3A/250VFUSE HOLDERLEN Use the plug provided to connect the mains power to the projector paying attention to the voltage and frequency mark
DMX TERMINATOR At the last fixture in the chain, the DMX output has to be connected with a DMX terminator. This prevents electrical noise from disturb
To control the projector with a DMX controller the DMX start address must be set. Ensure that none of the Stand-Alone options are set or they will in
MAINTENANCE If the projector’s lens becomes damaged or broken it should be replaced. If the lamp becomes damaged or deformed in any way it must be
KEEPING THE PROJECTOR CLEAN To ensure the reliability of the projector it should be kept clean. It is recommended that the fans should be cleaned e
Commentaires sur ces manuels